Wine refrigerators and wine cellars provide separate functions with the essential difference between the two being the optimal length of storage as well as the temperature at which bottles are cached. Generally speaking, sparkling wine, champagne, and lighter bodied white wines such as pinot grigio’s are at their best when they are chilled to a temperature range of 40 to 45 degrees. Full-bodied chardonnays, on the other hand, should be served at temperatures that are about 10 degrees warmer.
Considering that the family refrigerator will normally run at temperatures between 36 and 40 degrees and a wine cellar should maintain a range of 55 to 65 degrees, the best solution for serving these types wine at their optimal temperature will be a wine refrigerator. These refrigerators come in a variety of sizes, with storage capacities ranging from 6 to 200 bottles.
Despite the fact that a wine refrigerator will enable white wines to be served at their best temperatures, it will not be the best choice for the long term storage of a collection. This work is best left for a wine cellar with an environment of 55 to 60 degrees and a humidity level that consistently hovers around 70%, because long term storage at lower temperatures in a wine refrigerator can mute the flavors and varying levels of humidity can lead to a drying out of the corks.
For serious wine collectors, the best solution is to go with a wine refrigerator and a wine cellar. The availability of both storage options allows for bottles of sparkling wine, champagne, and white wine that are ready to be served to be rotated from the cellar to the wine refrigerator where they can be chilled to their optimal temperatures. Bottles that will be aged, as well as the red wines that are ready to be served, can be stored in the cellar, giving the collector perfect wine storage solutions for both the long and short term.
Showing posts with label Whirlpool Top Load Washers. Show all posts
Showing posts with label Whirlpool Top Load Washers. Show all posts
Friday, September 6, 2013
Wednesday, April 3, 2013
Optimizing the Performance of Your Energy Star Clothes Washer
ENERGY STAR appliances get their ratings by meeting benchmarks for operating efficiency and energy savings. While these appliances are designed for efficiency in everyday use, you can optimize the performance of, and maximize the savings from your ENERGY STAR washing machine by following these tips:
* Run your washer with full loads as often as possible – While sensors and settings can be used to make adjustments for smaller loads, clothes washers deliver maximum savings when full wash loads are run, resulting in a lower number of wash cycles per week.
* Don’t automatically assume that every load requires hot water – Depending on the stains, dirt or grime that you’re trying to get out of your clothes, in most cases you’ll be able to get the same results from running cycles with warm or cold water. The one exception would be the necessity of using hot water to remove oily stains. Keep in mind that using hot water will eat up about 90% of the energy used for a wash load while warm water uses about 50% less energy. Using cold water means that energy will only be used to operate the machinery, which maximizes your savings.
* Use the spin cycle – The spin cycle removes moisture from the clothes using centrifugal force. Longer and faster spin cycles will remove more moisture, which will reduce the length of the drying cycle.
* Use the recommended type of detergent – If you have a front loading washer, High Efficiency detergents which generate a lower amount of soap suds are recommended. Going with traditional detergents produces a higher than desired level of suds, which will reduce washing efficiency and may lead to mechanical issues down the line.
* Leave the door to your front loading washer open after completing a wash load – Unlike top loading washers, front loading necessitates a water-tight seal to prevent leakage. While a tightly sealed door is necessary to keep water in the basin during a wash, it will also trap moisture left behind if the door is shut once the wash is completed. This trapped moisture can be seen as condensation on the glass of the door and can lead to moldy and/or mildewy odors. If you smell these odors when opening your washer door, run a cycle without a wash load using about 8 ounces of bleach to remove them. Instead, leave the door open slightly after a wash load to allow residual moisture to evaporate.
Running your ENERGY STAR washing machine at its highest level of efficiency can save energy, time and money on both wash loads and drying loads. What you do with that extra time and money is up to you.
* Run your washer with full loads as often as possible – While sensors and settings can be used to make adjustments for smaller loads, clothes washers deliver maximum savings when full wash loads are run, resulting in a lower number of wash cycles per week.
* Don’t automatically assume that every load requires hot water – Depending on the stains, dirt or grime that you’re trying to get out of your clothes, in most cases you’ll be able to get the same results from running cycles with warm or cold water. The one exception would be the necessity of using hot water to remove oily stains. Keep in mind that using hot water will eat up about 90% of the energy used for a wash load while warm water uses about 50% less energy. Using cold water means that energy will only be used to operate the machinery, which maximizes your savings.
* Use the spin cycle – The spin cycle removes moisture from the clothes using centrifugal force. Longer and faster spin cycles will remove more moisture, which will reduce the length of the drying cycle.
* Use the recommended type of detergent – If you have a front loading washer, High Efficiency detergents which generate a lower amount of soap suds are recommended. Going with traditional detergents produces a higher than desired level of suds, which will reduce washing efficiency and may lead to mechanical issues down the line.
* Leave the door to your front loading washer open after completing a wash load – Unlike top loading washers, front loading necessitates a water-tight seal to prevent leakage. While a tightly sealed door is necessary to keep water in the basin during a wash, it will also trap moisture left behind if the door is shut once the wash is completed. This trapped moisture can be seen as condensation on the glass of the door and can lead to moldy and/or mildewy odors. If you smell these odors when opening your washer door, run a cycle without a wash load using about 8 ounces of bleach to remove them. Instead, leave the door open slightly after a wash load to allow residual moisture to evaporate.
Running your ENERGY STAR washing machine at its highest level of efficiency can save energy, time and money on both wash loads and drying loads. What you do with that extra time and money is up to you.
Subscribe to:
Posts (Atom)